LED DMX512 Decoder - 3 Channel - 8 A/CH - 12-24 VDC

Each DMX common controller occupied 3 DMX address, adopt coding switch is setting DMX original address code from 1 to 9, 1 is the lowest, and 9 is the highest , 511 address code could be setted in all. This DMX common controller adopts the advanced 
micro control unit, receives standard DMX-512 digital control signal and transformed it into PWM signal to driving LED
With over 30 preprogrammed color changing patterns, including gradual changing, screening and jumping, our DMX controller offers a variety of display options.. As a powerful color managing controller, it will enable you to choose the desired pattern and appropriate speed to manage your RGB LED lighting fixtures.With 0 to 100 dimming grades, you can also control the color and brightness according to your requirements easily, and mix up to 1 million different colors.The LCD monitor on the controller offers an easy and visible managing method; the mounting bracket will enable the operator to easily fix the controller onto any place.

Specifications:
-Working temperature: -20 to +60 centigrade
-Output: 3 CMOS drain-open output
-Connecting mode: common anode
-Input Voltage: 12~24V DC
-Output Current:<8A(each circuit)
_Output Power:8A -5V:<120W, 12V:<288W, 24V:<576W (3 circuit)
-Static power consumption:<1W
-Product size: L166*W67*H41mm
-Net weight: 340g

The DMX512 decoder can control up to 3 different LED constant voltage products or any one RGB light bar or strip. Run the decoder under DMX512 digital control signals using the RJ45 or XLR3 input/output interfaces. For manual use, set the starting address of the driver using the DIP switches. Connect up to 8 amps per channel- 15 amps maximum for decoder. The decoder can control a maximum load of 180W using 12 VDC or 360W using 24 VDC. Includes one male and one female XLR3 connector.

• RJ45 Input/Output
• XLR3 Input/Output
• 12 VDC: 96W per channel, 180W total
• 24 VDC: 192W per channel, 360W total