PIR Sensor Stair Light Controller 32CH Single Color 2CH RGB Pixel SPI LED Strip Dimmer Indoor Stairway Light Controller 5V-24V
Package Content:
1 x Stair Light Controller
1 x Daylight sensor (30cm)
2 x PIR sensor
2 x Extension wire (5m)
1 x User manual
Features：
● With daylight sensor, when sufficient ambient light, the PIR sensor does not turn on the light.
● 32 channels single color LED strip supported, Max 1A current per channel.
● 2 groups SPI(TTL) signal output, drive 27 kinds IC digital RGB LED strip, IC type and R/G/B order can be set.
Compatible ICs: TM1803, TM1804, TM1809, TM1812, UCS1903, UCS1909, UCS1912, UCS2903,
UCS2909, UCS2912, WS2811,WS2812, TM1829, TM1914A, GW6205, GS8206,GS8208,LPD6803, LPD1101,
D705, UCS6909, UCS6912, LPD8803, LPD8806, WS2801, WS2803, P9813, SK9822.
● 4 working modes selectable. Built-in multiple color mode, speed and brightness 1-8 grade adjustable.
● Two stair light controllers can cascade.
● Push switch can be used as induction signal input.
● Easy operation with OLED display and 3 buttons.
● Any damaged LED channel in 32 channels can be set disable.
Motion Sensor Switch Security light Control IR Infrared Movement Induction Detector With Switcher AC110V -220V ON/OFF/PIR
Reference: PIR-6A
Automatic DC 12V-24V 6A Infrared PIR Motion Sensor Switch For LED light Material:plastic and metal Type:Pir Switch. Easy to install and simple to use. Adjust the light soft and stable, no flickering.
DC5V 12V 24V 5A PIR Infrared Motion Sensor Switch
Reference: PIR-8A
DC 12V~24V 8A Automatic LED Users can install the human body sensors in the appropriate environment according to actual needs. When detecting any action/moving, the light turns on and keep 10 seconds. If there is no action after 10 seconds, the switch turns off. Please note, the delay time (10 seconds) has been set and cannot change, Note:It is not...
Reference: PIR-30A
This PIR motion sensor automatically powers on connected 12 VDC or 24 VDC LED lights when human motion is detected. The sensors will power on lights at night or during the day, and an adjustable dial allows your lights to remain on for up to 2 minutes (full clockwise turn to 10 equals 2 minutes, and a full counterclockwise turn to 1 equals 45 seconds)....
Brand: WINWINLED
Inline Switch On Off with Female Male Power Cable 5.5x2.1mm DC Connector Jack Wire Switch 5V 12V 24V for CCTV LED Strip Light...
Custom Wire Harness Custom Auto Wire Harness Wiring Harness Custom
This is 12V only
