Feature:
Infrared sensor switch and general-use switch.
• On/ Off and PIR operation settings.
• When the switch is turned to “ON” or “OFF”, it can be used as an ordinary switch, and when it is turned to “PIR”, it can be used as an infrared sensor switch.
• The light sensitivity and duration of time is adjustable.
• Commonly used to control lighting and ventilation
• Power-saving by ensuring lights and fans are not left on
• Saves energy by ensuring lights and fans are not left on
Specification:
Power Source: 110-240 V / AC
Detection range: >140 degree
Power frequency: 50-60 Hz
Working temperature: -20~+40 centigrade
Ambient light: 3-1000 LUX (adjustable)
Working humidity: < 93% RH
Time-delay: 5 sec. - 7 min. ± 2 min. (adjustable)
Rated load: 500 W ;
Installation height: 0.4~1.8 m
Power consumption: 0.45 W (work) 0.1 W(static)
Detection moving speed: 0.6~1.5 m/s
Detection distance: 10 m max (< 22 centigrade)
Function:
1.Can identify day and night: The consumer can adjust work ambient light. It can work in the daytime and at night when it is adjusted on the “sun” position (max). It can work in the ambient light less than 3 LUX when it is adjusted on the “moon” position (min). As for the adjustment pattern, please refer to the testing pattern.
2.Time-delay is added continually: When it receives the second induction signals after the first induction, it will compute time once more on the rest of the first time-delay basic.(set time)
3.Time-delay adjustment: It can be set according to the consumer's desire. The minimum time is 10sec ± 3 sec. The maximum is 7 min ± 2 min.
4.Switches: “ON”,“OFF”,“PIR”
Custom Wire Harness Custom Auto Wire Harness Wiring Harness Custom
Motion Sensor Switch Security light Control IR Infrared Movement Induction Detector With Switcher AC110V -220V ON/OFF/PIR
Brand: WINWINLED
Inline Switch On Off with Female Male Power Cable 5.5x2.1mm DC Connector Jack Wire Switch 5V 12V 24V for CCTV LED Strip Light...
Reference: ES32
DC5V 12V 24V 5A PIR Infrared Motion Sensor Switch
Reference: PIR-30A
This PIR motion sensor automatically powers on connected 12 VDC or 24 VDC LED lights when human motion is detected. The sensors will power on lights at night or during the day, and an adjustable dial allows your lights to remain on for up to 2 minutes (full clockwise turn to 10 equals 2 minutes, and a full counterclockwise turn to 1 equals 45 seconds)....
Reference: PIR-6A
Automatic DC 12V-24V 6A Infrared PIR Motion Sensor Switch For LED light Material:plastic and metal Type:Pir Switch. Easy to install and simple to use. Adjust the light soft and stable, no flickering.
This is 12V only
Reference: PIR-8A
DC 12V~24V 8A Automatic LED Users can install the human body sensors in the appropriate environment according to actual needs. When detecting any action/moving, the light turns on and keep 10 seconds. If there is no action after 10 seconds, the switch turns off. Please note, the delay time (10 seconds) has been set and cannot change, Note:It is not...
